Re: Tempest problems

getting the transformer to run in a 19v200 pcb would be a little tricky
because of the oscillator circuit, running a 6100 cage on a 19v2000 chassis
would be a better way to go.
----- Original Message -----
From: "Tony Roussos" <troussos@neo.rr.com>
To: <vectorlist@vectorlist.org>
Sent: Tuesday, April 11, 2006 2:08 AM
Subject: Re: VECTOR: Tempest problems

> Mark,
> That might not be a problem.
> How much higher is it?
> Is the secondary producing AC or DC?
> Are the other winding specs close?
> Perhaps a little mod to the primary circuit will effectively lower the
> secondary output.
> Like I mentioned before, the physical footprint and form look close
> enough. It depends how far apart the specs is the 6100 from the 19v2000.
> Does anyone have detailed data?
>
> Thank you.
> Tony
>
>
>
> ----- Original Message -----
> From: "Mark Shostak" <xx.vl@cinelabs.com>
> To: <vectorlist@vectorlist.org>
> Sent: Monday, April 10, 2006 8:34 PM
> Subject: Re: VECTOR: Tempest problems
>
>
>> Negative; the 6100 anode voltage is much higher.
>>
>> On Mon, Apr 10, 2006 at 06:31:59PM -0400, Tony Roussos wrote:
>>> Joe,
>>>
>>> Do you happen to have a scheme of the EHT transformer pinout and
>>> associated voltages. I'm hoping I can use a 6100 transformer to work in
>>> a 19v2000. They visually look similar. If it will take a comparable
>>> input and provide an appropriate output, I would be happy.
>>>
>>> Tony
>>> ----- Original Message -----
>>> From: Joseph Magiera
>>> To: vectorlist@vectorlist.org
>>> Sent: Monday, April 10, 2006 4:34 PM
>>> Subject: Re: VECTOR: Tempest problems
>>>
>>>
>>> I have to admit I haven't trouble shot yet. I fully planned to this
>>> past weekend, but too many family things came up. I did plan on cross
>>> testing it with another good Tempest boardset and another good 6101.
>>> I'll let the list know results.
>>>
>>> Joe
>>>
>>> "Christopher X. Candreva" <chris@westnet.com> wrote:
>>> On Sun, 2 Apr 2006, joemagiera wrote:
>>>
>>> > Another game party casualty. After on for a few hours in a warm
>>> room with
>>> > 20+ other games on, my Tempest developed two problems:
>>>
>>> Since no one ever answered this I'm going with my standard: Have you
>>> verified that it is the board or monitor ? I usually just hook up my
>>> scope
>>> in XY mode as a second monitor and compare the two images .
>>>
>>> I've seen weird things like this happen when I had loose solder
>>> joints in my
>>> monitor.
>>>
>>>
>>> ==========================================================
>>> Chris Candreva -- chris@westnet.com -- (914) 967-7816
>>> WestNet Internet Services of Westchester
>>> http://www.westnet.com/
>>> ---------------------------------------------------------------------------
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>>
>>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.4.0/306 - Release Date: 09/04/2006
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Apr 11 03:28:15 2006