As far as i know from the experience ive had with black widow and gravitar wire harness is,they are the same eccept that the black widow harness has an extra 4 wire harness that is only for 1 joystick controller,all the other wires are on the gravitar wire harnes and are the same for the black widow.The part number for that extra harness is:A039990-01 REV.A B854002 Now the REV part you might not need....As far as which gage to use.....22 gage should be fine for that extra harness.Hope that answers your question....:)
Ron Matuszak <ron.matuszak@buckeye-express.com> wrote: I just picked up a Black Widow and it's missing part of the harness. It's the piece that goes from 15 pin monitor out on the main harness, to the 15 pin plug on a K6100. I think its part # A038593-01 It's looks about 14-18 inches long
Does anyone know if it is just a pin-to-pin extender or are any pins changed. Also does it matter what gage wire I use ? Or can I use wire from a old hacked Pole Position Harness ? I ordered a color xy molex kit from Bob Roberts. I want to make sure I hook this up right. It's my first color vector.
Thanks,
-Ron
---------------------------------
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue May 2 23:06:39 2006
This archive was generated by hypermail 2.1.8 : Tue May 02 2006 - 23:50:00 EDT