Re: Re[2]: WG 6102

Check the transistor sockets.

Thad

peter jones wrote:
> -----Original Message-----
> From: Scott Caldwell <scottcaldwell@sbcglobal.net>
> To: vectorlist@vectorlist.org
> Date: Sun, 13 Aug 2006 17:21:17 -0500
> Subject: Re: VECTOR: WG 6102
>
>
>> I reflowed the solder on both of the neck board connectors, but
>> no change. Also, tried pushing in the wires of both of those plugs,
>> but again no change. Unfortunately, I have no spare parts for
>> a WG61xx.
>>
>> Scott C.
>>
>
> and it still changes when you knock it?
> then time for the plastic/glass rod to tap each part seperatly.
>
> start with the pulse-transformer and then the diodes they arent solid so internals can move.
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Aug 14 08:36:17 2006