Check the inputs and outputs ok IC 9K
----- Original Message -----
From: Joseph Magiera
To: vectorlist@vectorlist.org
Sent: Friday, October 06, 2006 8:01 PM
Subject: VECTOR: Star Wars troubles
My Star Wars is fully working EXCEPT for the game does not respond to the controller handles being moved up. Actually, it might be down, I don't recall right now, but it definitely only has a problem in one direction.
I suspected the 5K pot in the control panel, but that tested fine. I even tried another known good pot, and that is not the problem. I checked to be sure there was nothing inhibiting the movement of the pot and it seems fine. All voltages off the power supply appear good, and the game is working fine otherwise, which points to the PCB at this point. Any one have any suggestions as to what components specifically on the PCB I can test/replace next? Thanks,
Joe
joemagiera@ameritech.net
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.12.12/461 - Release Date: 10/2/2006
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Oct 6 15:07:09 2006
This archive was generated by hypermail 2.1.8 : Fri Oct 06 2006 - 15:50:01 EDT