Re: Which Chassis to drive a 25" A63ABZ26X ?

Hi Will,
Thank you so much for posting the link to help those who are seeking
for this info.

Thank you very much!
regards,
Scott

On Tue, Jul 8, 2008 at 1:51 PM, Bill Boucher <boucher@mnsi.net> wrote:
> I posted here for you...
> http://www.biltronix.com/pdf_files/K6100_Manual_3rd.pdf
>
>
> William Boucher
>
> ----- Original Message ----- From: "Scott Ho" <synthplayer88@gmail.com>
> To: <vectorlist@vectorlist.org>
> Sent: Monday, July 07, 2008 10:26 PM
> Subject: Re: VECTOR: Which Chassis to drive a 25" A63ABZ26X ?
>
>
>> Hi guys,
>> Can anyone direct a source where I can find the 3rd edition of the
>> WG6100 manual online?
>>
>> Thank you,
>> regards,
>> Scott
>>
>> On Tue, Jul 8, 2008 at 7:38 AM, Colin Davies
>> <colin.w.davies@btopenworld.com> wrote:
>>>
>>> Thanks... I will be using an Amplifone Chassis to drive this tube..... If
>>> the connector is a different shape/type, I will make it fit :-)
>>>
>>> I am hoping that the 25" A63ABZ26X has the same angle as the 25"
>>> Amplifone
>>> tube A63AAX00X - Is this correct ? - I've got conflicting information
>>> again
>>> on this.....
>>>
>>> My only problem will then be converging the thing !!!!
>>>
>>> Thanks, Colin
>>>
>>>
>>> ----- Original Message -----
>>>
>>> From: Malcolm Mackenzie
>>> To: vectorlist@vectorlist.org
>>> Sent: Monday, July 07, 2008 9:59 PM
>>> Subject: Re: VECTOR: Which Chassis to drive a 25" A63ABZ26X ?
>>> My bad. I should have caught that. I always use the 3rd edition of that
>>> manual. The others are unreliable. -Malcolm
>>>
>>> Colin Davies <colin.w.davies@btopenworld.com> wrote:
>>>
>>> Thanks,
>>>
>>> I found another pdf of the manual - The pinouts in the 2nd edition wg6100
>>> manual were completely wrong - 3rd edition pinouts for th 6100 tube match
>>> the amplifone tube now :-)
>>>
>>> Regards, Colin
>>>
>>> ----- Original Message -----
>>> From: "Fibrefix"
>>> To:
>>> Sent: Monday, July 07, 2008 12:44 AM
>>> Subject: Re: VECTOR: Which Chassis to drive a 25" A63ABZ26X ?
>>>
>>>
>>>> http://www.repairfaq.org/sam/crtfaq.htm
>>>>
>>>> A lot of info here Colin.
>>>> ----- Original Message -----
>>>> From: "Colin Davies"
>>>> To:
>>>> Sent: Monday, July 07, 2008 12:07 AM
>>>> Subject: Re: VECTOR: Which Chassis to drive a 25" A63ABZ26X ?
>>>>
>>>>
>>>> So.... Do CRT's generally have the same standard pinouts and electrical
>>>> characteristics then ?
>>>>
>>>> I'm also very curious about convergence / shunt magnets and such.... I'm
>>>> a
>>>> noob to all of this too.. hence the silly questions.....
>>>>
>>>> Cheers, Colin
>>>> ----- Original Message -----
>>>> From: Malcolm Mackenzie
>>>> To: vectorlist@vectorlist.org
>>>> Sent: Sunday, July 06, 2008 3:49 AM
>>>> Subject: Re: VECTOR: Which Chassis to drive a 25" A63ABZ26X ?
>>>>
>>>>
>>>> Hey James,
>>>>
>>>> That's the tube I was going to attempt this on (U2000). Could you send
>>>> me
>>>> a picture of your shunt job. I'm new at the convergence thing (having
>>>> only
>>>> done 6100 before), and I'm interested in your placement method.
>>>>
>>>> It would be great if we could get a definitive method as to how to do
>>>> this
>>>> on the Vectorlist. -Malcolm
>>>>
>>>> James Hagen wrote:
>>>> You can go either way, (AMP or 6100 parts) but be prepared to
>>>> desolder/swap out the neck connector if using 6100 def board/HV cage.
>>>> Amplifone is preferred as it does a better job keeping up with SW.
>>>>
>>>> I ended up using a tube from a WG U2000/5000 convergence was tough,
>>>> but when looking at pics of an original 25" in a SW CP, it seems that
>>>> even original 25" Amp tubes have about 50 magnetic shunts ;-)
>>>>
>>>> Scott Evans sent me an original 25" Amp yoke a while back- the part
>>>> number on the yoke is not the same, but in terms of shape, windings,
>>>> it's identical to a 6100 yoke... and was no easier to converge than
>>>> having already tried a standard 6100 yoke....
>>>>
>>>> James H.
>>>>
>>>>
>>>>
>>>>
>>>> On Sat, Jul 5, 2008 at 7:43 PM, Malcolm Mackenzie
>>>> wrote:
>>>> > I'm attempting to do this as well Colin. My understanding is that you
>>>> only
>>>> > need the 6100 yoke ( it's the same part as the 25" Amplifone yoke)
>>>> and
>>>> then
>>>> > the HV and deflection boards from the Amplifone. -Malcolm
>>>> >
>>>> > Colin Davies wrote:
>>>> >
>>>> > Hi Guys,
>>>> >
>>>> > I've been offered a 25" A63ABZ26X picture tube for my Starwars
>>>> cockpit
>>>> which
>>>> > is currently fitted with a 19" WG6100. I also have a 19" Amplifone
>>>> monitor
>>>> > complete.
>>>> >
>>>> > Is this a drop in replacement for the origonal amplifone tube running
>>>> from
>>>> > an amplifone chassis (fitted with 6100 yoke), or do I need to use a
>>>> 6100
>>>> > chassis to drive this ?
>>>> >
>>>> > I think the pinouts are different on the two chassis / tubes looking
>>>> at the
>>>> > manuals, but can anyone confirm please ?
>>>> >
>>>> > One of the kind members on here has pointed me to this
>>>> article...which
>>>> leads
>>>> > me to belive that I do need to use a 6100 chassis / neck board.
>>>> >
>>>> >
>>>>
>>>>
>>>> http://groups.google.com/group/rec.games.video.arcade.collecting/browse_thread/thread/15bc596122ad8409/cdc315860f1194b2?lnk=gst&q=amplifone+25+19&rnum=26
>>>> >
>>>> > Thanks, Regards,
>>>> > Colin
>>>> >
>>>>
>>>>
>>>> ---------------------------------------------------------------------------
>>>> ** Unsubscribe, subscribe, or view the archives at
>>>> http://www.vectorlist.org
>>>> ** Please direct other questions, comments, or problems to
>>>> chris@westnet.com
>>>>
>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------------
>>>> ** Unsubscribe, subscribe, or view the archives at
>>>> http://www.vectorlist.org
>>>> ** Please direct other questions, comments, or problems to
>>>> chris@westnet.com
>>>
>>>
>>> ---------------------------------------------------------------------------
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>>
>>>
>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jul 8 02:33:35 2008