Wg 6100 P314 Atari Zener mod

Hi guys,

Wonder if anyone has a P314 around that has the Atari suggested zener
mod installed. I know there maybe better ways for the overvoltage
protection, but I decided to go this way. If you have a picture please
mail it to me or put it up somewhere.

You can see my work here:
web.jpg

I hope I've done this correctly. I assume the big T shape like track
is the GND. The zeners are covered by some shrink tube but the
cathodes and anodes are the right direction, just asking if they are
on the right spots.

I also did not solder the other diodes to the solderings of the
connectors because those are already pretty poor (as you can see by
the two repairs I had to do). So, I followed the traces and installed
the diodes a bit further away, but still on the same electrical spots
AFAIK.

Any help welcome before I power it up.

Thanks,

André Huijts
andre.huijts@orange.nl

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Aug 9 14:24:34 2008