only have a single brightness dial.. on both.
--- On Mon, 6/1/09, Rodger Boots <rlboots@cedar-rapids.net> wrote:
> From: Rodger Boots <rlboots@cedar-rapids.net>
> Subject: Re: VECTOR: cinematronics monitors
> To: vectorlist@vectorlist.org
> Received: Monday, June 1, 2009, 12:06 PM
> I was using the Solar Quest
> manual.....so depending on which monitor assembly is in your
> machine what I said may or may not apply.
>
>
> Lewis D'Aubin wrote:
> > Rodger Boots wrote:
> >> There is a brightness control and a contrast
> control. Brightness sets the brightness of the darker
> lines and contrast sets the brightness of the brighter
> lines.
> >>
> >> If you set contrast to minimum, then set
> brightness so darker lines are visible, then set contrast
> for desired brightness of bright lines, you should be good.
> >
> > Not on a Cinematronics monitor... the intensity of
> both hi and lo brightness lines is set by a single
> brightness control, and the difference between the line
> intensities is set by a resistor (I believe it's R10 - can
> anybody confirm this?) The value of this resistor
> could be changed for a different 'lo' brightness value (has
> anybody tried this?)
> >
> >
> -Lewis
> >
> >
> ---------------------------------------------------------------------------
>
> > ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> > ** Please direct other questions, comments, or
> problems to chris@westnet.com
> >
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
__________________________________________________________________
Looking for the perfect gift? Give the gift of Flickr!
http://www.flickr.com/gift/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Jun 1 16:04:43 2009
This archive was generated by hypermail 2.1.8 : Mon Jun 01 2009 - 16:50:00 EDT