Re: Tech Star Wars Help

Yes ramcontrols.com sells the gears, or a complete rebuild kit for the Yoke.

Give David a call, and mention my Name, and KLOV.COM

On Fri, Sep 18, 2009 at 11:16 AM, Frank Zapotoczny <fzzap@aol.com> wrote:

> One more question Guys,
>
>
>
> Is there a source or replacement for the gear that goes on the Pot for the
> up and down movement. (small gear).
>
>
> ------------------------------
>
> *From:* owner-vectorlist@vectorlist.org [mailto:
> owner-vectorlist@vectorlist.org] *On Behalf Of *Douglas Gauck
> *Sent:* Friday, September 18, 2009 9:16 AM
> *To:* vectorlist@vectorlist.org
> *Subject:* Re: VECTOR: Tech Star Wars Help
>
>
>
> Sounds like a thermally induced problem. Seat of my pants says the little
> potentiometers, or a connection issue. Or maybe the big blue cap on the
> power supply? I know the pots and cap are on my list of perishable parts
> I've neglected to replace.
>
>
>
> -DrG
>
>
>
>
>
> On Sep 18, 2009, at 8:40 AM, Frank Zapotoczny wrote:
>
>
>
> Kind of both directions up and down and left and right. I recapped the
> boards a long time ago and I was going to try that to start along with
> resoldering the connectors. I will try to get a video today. But it did’t
> look like the vector lines were moving but that the whole picture was
> jumping.
>
>
> ------------------------------
>
> *From:* owner-vectorlist@vectorlist.org [
> mailto:owner-vectorlist@vectorlist.org <owner-vectorlist@vectorlist.org>]
> *On Behalf Of *Andre Huijts
> *Sent:* Friday, September 18, 2009 1:36 AM
> *To:* vectorlist@vectorlist.org
> *Subject:* Re: VECTOR: Tech Star Wars Help
>
>
>
> A video would sure help. Could you describe how it jumps
> (left-right/up-down or other way)?
>
>
>
>
>
>
>
>
>
> Op 18 sep 2009, om 03:50 heeft Frank Zapotoczny het volgende geschreven:
>
>
>
>
> I have a Star Wars upright with a Amplifone monitor. It has a wintron HV
> installed and had worked great for many years. It has been sitting for a
> about a year without being played.
>
>
>
> I turned it on to play a few games and the picture came up and looked
> great but after a few seconds the picture began jumping around and getting
> shaky. After about 5-10 minutes it stopped moving around and looked great
> again. Then after a few more minutes it started jumping around again.
>
>
>
> Can you guys give me a suggestion on where to start looking.
>
>
>
> Thanks in advance for any help/
>
>
>
> Frank
>
>
>
> André Huijts
>
> andre.huijts@upcmail.nl
>
>
>
>
>
>
>
>
>
>
>
> =
>
>
> =

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Sep 18 12:33:06 2009