Re: Amplifone yoke

Clay,

   Any word on that Sega sound board? ;-)

Ed

Clay Cowgill wrote:
>> Question about Amplifone yokes: what do I need to look for to
>> identify the yoke by it's numbers ? I know what they look
>> like, but I've seen several number info on pictures.
>>
>> F.I. my spare yoke has these data:
>> 9A2806-001D
>> 17-8143
>>
>> The one on my SW cockpit has:
>> 9A2806-001B
>> 17-8144
>>
>> Is it OK as long as the 9A2806 is the same ?
>>
>
> I would think that's fine. You could always measure the DC resistance of
> the windings on each as a sanity-check just to be sure. If they vary by
> more than ~10% or so from one another I'd be cautious about proceeding, but
> odds are good they'll be the same. The "-8143" -"8144" look suspiciously
> like date codes (1981, 43rd/44th week), but that seems pretty early for
> Amplifone yokes to me...
>
>
>> P.S. Clay, are the pincushion correctors finished. I could do
>> the Euro sales overhere if you want.
>>
>
> I haven't had much free time lately (and the free time I have had I've been
> putting in to getting some working spares for my 6100's going), but I'll try
> to get a panel or two built up and tested in the next couple weeks.
> Dragging my one working 6100 HV cage back and forth to test the display
> correctors is a pain, so that got old in a hurry. ;-) The ones I've built
> so far have fired right up, but I haven't completed a whole panel yet.
> (Just to check that all the step and repeats on the PCB are actually the
> same...)
>
> -Clay
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Oct 1 02:39:22 2009