RE: 6100 zener diode mod advice?

Great lists - thank you.

I found an inexpensive source (MPJA 50 cents each or 26 cents each if you
buy 100 pcs) for LM305s (NEC cross part uPC-141CA) that are used on the
Atari AR's but the supply is limited and I ask everyone to be polite :).

http://www.mpja.com/prodinfo.asp?number=1216+RG

Bill

-----Original Message-----
From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of William Boucher
Sent: Tuesday, October 06, 2009 7:55 AM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: 6100 zener diode mod advice?

Since you rebuild so many wg6100's, you might want to consider buying parts
yourself directly from a distributor to save money. If so, try my list...

http://www.biltronix.com/arcade_electcomp_01.html#wg6100_rebuild_parts

Since I started using this list instead of buying the kits, I saved a lot.

William Boucher

----- Original Message -----
From: "Total Impulse" <totalimpulse@comcast.net>
To: <vectorlist@vectorlist.org>
Sent: Monday, October 05, 2009 6:29 PM
Subject: VECTOR: 6100 zener diode mod advice?

> About to start going through another WG K6100 - have Bob's full cap kit
> with additional parts & a LV6100 to put in it. This monitor is originally

> from a Tempest - has P314 deflection (with "input protection" on stilts),
> P315 HV, P316 neck. Thanks to Bob's parts kits and the FAQ, this will be
> the 4th 6100 that I've worked on. This monitor will be going in a Space
> Duel cabinet into which I'll be installing a Major Havoc conversion kit.
>
> Anyway, the previous three monitors all had P327 deflection boards, so I
> did not do the deflection board upgrade involving the zener diode
> installations. Is this highly recommended on the P314 board? If so,
> should I do the official Atari upgrade from the Major Havoc conversion kit

> instructions (pages 39-42 of the FAQ), or the "Frank's Crank's" version
> (pages 47-48 of the FAQ)?
>
> Thanks,
>
> Alan
> --
> Total Impulse - Just Having Fun!
> Alan Estenson, totalimpulse@comcast.net
>
>
---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.420 / Virus Database: 270.14.4/2416 - Release Date: 10/05/09
18:23:00

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Oct 6 10:51:46 2009