Re: Tempest problem.

Yeah, I just hit it with +5v and it started toggling. The problem hasn't
come back even through power cycles. It's been running just fine for the
past 12+ hours. Which seems odd to me, so I'm going to keep an eye on it for
a while longer.

Kevin

On Tue, Nov 17, 2009 at 7:27 AM, <kstillinger@sc.rr.com> wrote:

> Hey Kevin-
>
> What exactly do you mean when you say you 'toggled' the pin?
> Did you force it high with a momentary short to 5V? If so, did it start
> making the appropriate transitions afterwards? Does the problem re-appear
> after power cycling?
>
> Just curious and looking for more info.
>
> Kerry
>
> ---- Kevin Moore <talon.k@gmail.com> wrote:
> > Thanks Andrew. I have the alt circuit with the MC3410. Pin 4 was stuck
> low.
> > Toggled it, and the problem went away. I'm sure the problem will come
> back,
> > When it does, I'll have to check the proceeding circuit to see if the
> > problem is with the 3410, or somewhere before. But at least I know where
> the
> > problem lies.
> >
> > Thanks very much for pointing me in the right direction.
> >
> > Kevin
> >
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Nov 17 08:37:57 2009