Rather, 60VAC CT power supply (30V per leg).
On Tue, Feb 2, 2010 at 8:13 PM, Mark Shostak <shostakmark@gmail.com> wrote:
> According to Hans' XY Vector Monitor spec sheet, they are interchangeable.
> Both are listed as running off a 30VAC CT supply. You should be good to go.
>
> Do you happen to have the manual for your 15V2000?
>
> Has anyone seen a manual for the 15V2000?
>
> Thanks,
> -Mark
>
>
> On Tue, Feb 2, 2010 at 7:08 PM, <litterbox99@mchsi.com> wrote:
>
>> My Battlezone cabaret monitor (15v2000) started to bloom on me, or
>> I'm guessing that's what it's doing. I put the scope on it
>> and the image is OK, so it's the monitor.
>>
>> I have a spare 15" g05-805 out of a Asteroids that I'm thinking
>> of swapping out. From what I recall, are these a direct replacement,
>> pin for pin ? I'd like to confirm before I hook it up.
>>
>> Any tips on replacing the HV diode ? I've never changed one, but
>> as I understand, it's located in the cap at the tube and you have
>> to use some kind of HV silicone to prevent arcing.
>>
>> Todd
>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>>
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Feb 2 21:15:56 2010
This archive was generated by hypermail 2.1.8 : Tue Feb 02 2010 - 22:50:01 EST