RE: Battlezone Troubleshooting

Yes, it's better to have some photos. I can't understand if it is a power
problem(ripple capacitors and/or TO3 transistors) or a math problem

-----Original Message-----
From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Andrew Welburn
Sent: domenica 28 febbraio 2010 13.17
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Battlezone Troubleshooting

can you take a photo?

Andrew Welburn
www.andys-arcade.com
----- Original Message -----
From: "Rich Marquette" <rmarket@ptd.net>
To: <vectorlist@vectorlist.org>
Sent: Sunday, February 28, 2010 12:14 PM
Subject: VECTOR: Battlezone Troubleshooting

> I'm working on my Battlezone and I got it mostly working with one problem
> left.
> Some objects on the right hand of the screen get drawn distorted. It
> happens
> mostly with the triangle objects, it is like they get drawn inside out and
> then as they move towards the center of the screen they suddenly get drawn
> properly. It happens only in an area that is maybe an inch wide. In the
> attract mode, the E from Battle gets distorted but the E from Zone doesn't
> not and as the words move to the back of the screen the distortion clears
> up. The background mountains and enemy tanks all get drawn fine and the
> test mode doesn't show any errors.
> Anyone have any ideas on what to check or where to start troubleshooting
> on
> this?
>
> Thanks
> Rich
>
>
>
---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Feb 28 09:29:18 2010