Re: G05-802 focus issue

I like the way you think, Rodger.  All good points.  Focus on the simple stuff first.

I have thoroghly cleaned the screen, the overlay films, and the half-silvered mirror.  However, the out of focus observation was made with the monitor out of the cabinet and with the overlays off.

I did not mention that I have adjusted the brighness and contrast as follows:
1) both down all the way
2) increase brightness until vectors are just visible
3) increase contrast until the display is bright enough to play in a semi-darkened room.

I will try tweaking the brightness/contrast pots some more this evening to see if I can obtain better focus.

Thanks again,
Darren

--- On Fri, 7/23/10, Rodger Boots <rlboots2@gmail.com> wrote:

From: Rodger Boots <rlboots2@gmail.com>
Subject: Re: VECTOR: G05-802 focus issue
To: vectorlist@vectorlist.org
Date: Friday, July 23, 2010, 10:28 AM

Check that screen & overlay are clean. Try reducing brightness. On Jul 23, 2010 9:24 AM, "Darren Finck" <dgfinck@yahoo.com> wrote:

OK, I'm working on the G05-802 that came in my Battlezone. I have already:

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Jul 23 16:21:53 2010