Re: Video Goes Away After 1-3 minutes

Is the spot killer coming on, when the video goes away?

Do you hear "vector chatter" when the video goes away?

Do you have a spare board or spare monitor you can swap in?

-M

On Tue, Aug 31, 2010 at 12:29 PM, Tim Soderstrom
<tim@moocowproductions.org>wrote:

> I have a Space Duel cabinet with a WG vector monitor. It has the LV2000
> voltage mod and has been working well for quite a few years. Recently,
> though, it has stopped working properly. It sometimes shows proper video for
> about 1-3 or so minutes, after which the video cuts out like the monitor is
> not getting power.
>
> The HV board with the LV2000 has the LEDs powered up. I suspect it's the
> flyback but do not otherwise know how to fix that. I also noticed a while
> (with I think a blue stripe) wire that is not connected to anything also on
> the HV board. I think it's been that way for quite some time and doesn't
> seem to affect anything though I am not sure as to what the wire does (or
> where it goes).
>
> Anyone have any thoughts on what I should be doing? Since the tube is good
> I hesitate to swap it out for an LCD and use the VectorVGA stuff.
>
> Thanks!
>
> Tim
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Aug 31 13:51:45 2010