Re: Black Widow Strangeness

Yes I have swapped out the pokeys with new ones. I have tested the pokeys in
a tempest as well.

On Wed, Oct 20, 2010 at 3:39 AM, Andrew Welburn <andy@andysarcade.net>wrote:

> As someone else said, there is only the one Gravitar hardware pcb, Atari
> simply put stickers over the etching when they made Black Widow, all BW's
> are like this.
>
> Your sound issues in test mode feel Pokey related, have you swapped those
> out?
>
> --
> Andrew Welburn
> http://www.andys-arcade.com
>
> ----- Original Message -----
> *From:* Kevin Moore <talon.k@gmail.com>
> *To:* vectorlist@vectorlist.org
> *Sent:* Wednesday, October 20, 2010 12:50 AM
> *Subject:* VECTOR: Black Widow Strangeness
>
> Ok, I have two Black widows.
>
> While the Game play appears to be just fine on my Pat9000
>
> I'm having some oddities in Test mode.
>
> It appears these are either factory mods, or perhaps aftermarket. They have
> stickers covering the Gravitar name on the board.
>
> In any case, When I go into Test mode I get one of the following actions.
>
> Everything works as intended, self tests passes
> Self test comes up with QP and will not test sound but inputs work
> Self test comes up, no errors, but static sound until a button is pressed
> making a sound in test mode, then all is good.
> Lastly, constant Reset.
>
> In any of the cases, nothing will have been change, just toggle into test
> mode from power up, and if I switch to game mode it works fine.
>
> I did have a bad R1 on one board, but that seems to be Rom and Ram related.
>
>
> I was wondering if there we occasional problems with Black Widow running on
> Gravitar Hardware.
>
> Thanks,
>
> Kevin
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Oct 20 06:10:03 2010