Re: Tempest issue

good call, that fixed the level jumping. Still have no blue, player one button is non responsive, and test mode switch does nothing, before or after dip switch changed. Could be a bad button, but i am curious about another issue since test switch is also not working. thanks for the help thus far! Brett ________________________________ From: Rodger Boots <rlboots2@gmail.com> To: vectorlist@vectorlist.org Sent: Tue, January 25, 2011 12:40:09 AM Subject: Re: VECTOR: Tempest issue This sounds like the demo mode that is selected by the DIP switch on the vector generator board at location N13.  Switch 7 is probably off and switch 8 on to select free play mode.  If switch 1 is on and 2 is off you get demo mode.  Turn switch 2 on and you should be good. On Mon, Jan 24, 2011 at 8:15 PM, brett Jacquot <arcadehell1970@yahoo.com> wrote: I finally got my tempest built, and it has issues. I bought it from a friend, he had it 100% working, took all the guts out, started restoring the cab, and lost interest and i purchased it. I put all guts to it, and fire it up and here's what's happening. >  >1. No blue color in the monitor >2. both start buttons are flashing, only player 2 button is responsive. >3. Once i start a game, it warps in to the first level like normal, then it acts >like the round is cleared, and just warps to the next level, and repeats over >and over. > >  >I cleaned/reseated the edge connectors, and interconnect cables, and no change. >I suck at pulling and reseating chips, and i also suck at checking voltages. I'm >sure i probably should try those two first, but i just wanted some opinions. >thanks! Brett >
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jan 25 00:58:46 2011