Mickey,
A bad custom chip on the main deflection board can cause this symptom. Not
saying that this is what's happening in your case, but I had the exact same
problem many years ago and it was because of the custom chip (swapping in a
known good one made the problem go away).
-- Mark Jenison ----- Original Message ----- From: "Mickey Johnson" <mickster@derbyworks.net> To: <vectorlist@vectorlist.org> Sent: Monday, March 07, 2011 9:34 PM Subject: VECTOR: sega monitor adjustment help I have a sega star trek in a convert-a-cab. I have a nice bright picture, but it does have one issue. If the monitor has to draw a box, it is the most evident, instead of being a square, its more like a parallelgram. The lower part of the square is shifted to the right a bit. I am used to adjusting atari games, but on sega I really don't know what to do to fix this. I have recapped the monitor with no improvement. Another example that shows the problem is a high score list. each score starting at the top and going down is shifted a bit to the right. In star trek its not very noticable, but switching to eliminator or zektor its very noticeable. I will say that all the vectors are connected very well and the convergence and focus are also very good. thanks in advance for any help, mickey --------------------------------------------------------------------------- ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org ** Please direct other questions, comments, or problems to chris@westnet.comReceived on Tue Mar 8 21:57:33 2011
This archive was generated by hypermail 2.1.8 : Tue Mar 08 2011 - 22:50:00 EST