Re: spray DAG and springs

From: Jeffrey Matthews <spender1111_at_earthlink.net>
Date: Sat Mar 12 2011 - 09:15:45 EST

Andy;
When the DAG springs have lived out their usefulness, I head to Home Depot and pick up some generic skinny long metal springs. I solder a lead somewhere along the length of the spring and crimp on a connector. If they are too short, I just use two together.

I don't have a solution to the flaking issue, that should be interesting to see how that gets taken care of.....
Jeff



On 3/12/2011 5:16 AM, Andrew Welburn wrote:

hi all..

I tried to search the archives but didn't come up with any useable results, although i'm sure its been discussed before on here..

I have a couple of vector tubes where the DAG coating is flaking off on one side of the tube and really needs re-doing. One of the tubes (a 19" amp) has a rotten DAG spring thats been broken several times and twisted up to match, and without any flying lead to plug into the harness, but its so rusty it will keep breaking i'; not sure its worth patching again, does anyone know if there is an easy replacement for this ? Atari part number A201002-01 DAG SPRING ASSY.

Also, has anyone found the vinyl shunt assembly 178137-001 (magnetic shunts for correction) available anywhere?
--
Andrew Welburn
http://www.andys-arcade.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

--------------------------------------------------------------------------- ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org ** Please direct other questions, comments, or problems to chris@westnet.com Received on Sat Mar 12 09:16:03 2011