Any Heater Glow in the Neck ? - Chatter is good with no Led's !!
----- Original Message -----
From: John Huie
To: vectorlist@vectorlist.org
Sent: Sunday, May 15, 2011 2:14 AM
Subject: Re: VECTOR: Best place to start with Amplifone 19"
Yes, it plays blind quite nicely. Sorry, I forgot to mention that.
--- On Sat, 5/14/11, Colin Davies <colin.w.davies@btopenworld.com> wrote:
From: Colin Davies <colin.w.davies@btopenworld.com>
Subject: Re: VECTOR: Best place to start with Amplifone 19"
To: vectorlist@vectorlist.org
Date: Saturday, May 14, 2011, 5:08 PM
Does it coin up and play blind ? - Any sounds ?
----- Original Message -----
From: John Huie
To: vectorlist@vectorlist.org
Sent: Saturday, May 14, 2011 11:21 PM
Subject: VECTOR: Best place to start with Amplifone 19"
Just picked up a Star Wars with an Amp in it. Lady says it worked great until they moved it. I checked for loose connections, etc. but don't see anything. It has the blue PCB inside, and a white flyback. She also said the monitor had been "serviced" recently but I have no idea what that really means.
Anyway, there's no picture at all. I can hear chatter. No LED's are lit anywhere that I can see. I'm new to Amplifones. What would you guys recommend as a first course of action? I'm reading through the Amp FAQ right now but I thought with that minimal info you might have some ideas right off the bat. Also, I don't have an HV probe....I know that you can use the B+ on WG6100's to check the HV range...is there a similar way to do that with these?
Thanks!
John
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun May 15 15:18:03 2011
This archive was generated by hypermail 2.1.8 : Mon May 16 2011 - 01:50:01 EDT