Hello,
My Star Wars quit working a few days ago, no video. To try and track down the problem I ran the self test and I heard a low tone on the 6th indicating a bad RAM at 4p, after swapping with another working RAM, ran test again same problem showed up bad RAM at 4p. I swapped 3 chips in all and each time #6 beep/boop would indicate 4p being bad. So figuring problem was elsewhere I got the trusty meter out and ran continuity from each pin of 4p to all the other 5 RAMS, all tested fine, pin 18 of 4p RAM goes to 2K pin 6 and that checked ok too, even changed the socket to make sure it wasn't flakey. Anyone have any thoughts on what is going on with the board?
Thanks for your time,
Rich
Green Bay
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun May 22 16:50:45 2011
This archive was generated by hypermail 2.1.8 : Sun May 22 2011 - 20:50:01 EDT