Re: Errors in G05-802/5 manuals

I would be more than happy to produce the corrected version as this seems a worthwhile endeavor. I have much to learn about electronics t/s & repair but I am experienced in desktop publishing. Maybe this will help.

Darren: to completely expunge any metadata take a screen shot of the page(s) you've appended and send that. I'll recreate your notes.

I'll collate any/all contributions and send back to the list for proofing.

I have:
TM-146 issue 1
TM-146 issue 2
TM-151 issue 2
TM-151 issue 3
G05 FAQ v.1.2

Any other sources that need attention?

-Douglas

On May 24, 2011, at 10:33 AM, Darren Finck wrote:

> Perhaps... once the corrections have been reviewed and confirmed by several qualified vectorlist members.
>
> I don't wish to distribute my present commented PDF for a couple of reasons:
>
> 1) I'm not 100% certain of the corrections, I posted so some of the sharp people on here might review and confirm my observations and conclusions.
>
> 2) It's possible that there were different variations manufactured. I don't want to presume that everyone's G05-802 is just like mine.
>
> 3) The PDF annotations were made with a copy of Adobe registered to my employer. I don't wantto distribute a file that might have some metadata embedded in it which would point the origin as my employerer.
>
> To further clarify my notes, here's the original CRT schem (from p10 of TM-151, Issue 3):
> http://www.finck.net/CRT_schem_G05-803_orig.jpg
>
> And here's what I think it should be:
> http://www.finck.net/CRT_schem_G05-803_corrected.jpg
>
>
> With regard to the original poster's corrections:
>
> I agree that the diagram on p14 is quite misleading with regard to the orientation of the HV diode ("+" symbol on the cathode end). Luckily I've always ignored that diagram and looked at the schematic 2 pages prior.
>
> I am unable to confirm the correction to the P100 pinout, as my only G05-802 has had its original connector cut off and replaced with one for a V2000. However, the schematic certainly appears to conflict with the table on page 3.
>
> df
>
> --- On Tue, 5/24/11, Andre Huijts <a.huijts@upcmail.nl> wrote:
>
> From: Andre Huijts <a.huijts@upcmail.nl>
> Subject: Re: VECTOR: Errors in G05-802/5 manuals
> To: vectorlist@vectorlist.org
> Date: Tuesday, May 24, 2011, 4:27 AM
>
> Would it be a good idea to distribute the PDF including the errors annotated ?
>
>
> André Huijts
> andre.huijts@upcmail.nl
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue May 24 12:41:02 2011