Re: Space Fury Speech board.

The Sega XY FAQ on my site documents most issues for Space Fury. Usually
it's just a matter of replacing the electrolytic capacitor in the sounds
circuit; the schematics are pretty detailed about which sound is in what
circuit.

----- Original Message -----
From: <litterbox99@mchsi.com>
To: <vectorlist@vectorlist.org>
Sent: Thursday, July 14, 2011 9:56 PM
Subject: Re: VECTOR: Space Fury Speech board.

> Thanks Mark, that did it !
>
> Speech is now working after trying different ROM versions,
> the one I had must have been bad or wrong.
>
> Is there a good pointer for the sound board, I seem to
> be missing a few sound effects.
>
> Todd
>
> ----- Original Message -----
> From: "Mark Jenison" <jenison@enteract.com>
> To: vectorlist@vectorlist.org
> Sent: Wednesday, July 13, 2011 9:51:11 PM GMT -06:00 Central America
> Subject: Re: VECTOR: Space Fury Speech board.
>
>
> Does your have the letter markings on it?
>
> If so, fourth eprom socket from the left (assuming edge pins at bottom), E
> (top jumper) should be cut, F (second from top) should be jumpered.
>
> On the far right, there should be 4 jumpers, top being 16, second being
> 32,
> third being 16, fourth being 32. Cut the 16's, jumper the 32s.
>
> I should add this to the Sega XY FAQ...
>
> ----- Original Message -----
> From: <litterbox99@mchsi.com>
> To: <vectorlist@vectorlist.org>
> Sent: Wednesday, July 13, 2011 10:40 PM
> Subject: Re: VECTOR: Space Fury Speech board.
>
>
>> Mark,
>>
>> Yes it is Clays mutigame that I bought 10 + years ago..
>> Mine defaults to Star Trek, not the Menu.. if Clay could
>> chime in :-)
>>
>> If I can't set the default game that's ok, but I would
>> like some working ROM images and know how to strap the board.
>>
>> There are a few traces and jumpers that need to be set or
>> cut. If someone has a working speech board for Space Fury
>> and could take a pic or LMK what jumpers to set or cut that
>> would be great !
>>
>> Thanks
>>
>> Todd
>>
>> ----- Original Message -----
>> From: "Mark Jenison" <jenison@enteract.com>
>> To: vectorlist@vectorlist.org
>> Sent: Wednesday, July 13, 2011 9:24:02 PM GMT -06:00 Central America
>> Subject: Re: VECTOR: Space Fury Speech board.
>>
>> There's two versions of Space Fury Speech data (ran across this same
>> problem
>> myself).
>>
>> I assume this is Clay's multigame? Manual says it should start up in
>> Menu
>> mode. Doesn't mention anything about default game.
>>
>> I just bought one of these but haven't had a chance to play with it yet.
>>
>> ----- Original Message -----
>> From: <litterbox99@mchsi.com>
>> To: <vectorlist@vectorlist.org>
>> Sent: Wednesday, July 13, 2011 9:36 PM
>> Subject: VECTOR: Space Fury Speech board.
>>
>>
>>> Hey all...
>>>
>>> I have a Sega Multi game that I'm getting ready to sell.
>>>
>>> I have lost or misplaced my speech board for Space Fury.
>>>
>>> I have a spare speech board so I need the info to 'strap' the
>>> board for Space Fury and I could use some ROM images, the ROM's
>>> I have don't match the ROM's that I have found on the
>>> net... they don't verify, and I don't want to chase my tail
>>> on this.
>>>
>>>
>>> Also, is their a way to set the 'default' game to Space Fury
>>> on boot up instead of Star Trek...
>>>
>>> Thanks
>>>
>>> Todd
>>>
>>>
>>> ---------------------------------------------------------------------------
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Jul 15 19:44:47 2011