Leave it be, when it breaks again then fix it. Also, I am local so I can
help if you need it.
-----Original message-----
From: "Christopher X. Candreva" <chris@westnet.com>
To: vectorlist@vectorlist.org
Sent: Sun, Aug 14, 2011 01:57:31 GMT+00:00
Subject: VECTOR: Heisenbugs in my Tempest
The recent posts about cleaning POKEY pins inspired me to try to fix my
Tempest tonight. It had all the symptoms fo either bad or dirty POKEYs, or
at least it did as I recall.
Because when I went to turn it on toinight for a pre-teardown test, the
*!@&!@! thing had the gall to just WORK ! :-)
As I recall the problems were no enmies ever comming up and the spinner
continualy spinning on it's own. However it had been a while.
So I have a delima: Pull the chips and clean them anyway, or wait for it to
break again ?
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 948-3162
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Aug 13 23:11:56 2011
This archive was generated by hypermail 2.1.8 : Sun Aug 14 2011 - 00:50:01 EDT