RE: Problems restoring a SPEED FREAK

Hi John,
I know "thin wires" problem, I had that on another cab :)
In this case after a couple of minutes working, it starts to whistle very
strongly and the screed decreases a little.
In any case I'm interested in your offer because I have several monitor PCBs
without transformer...

I wanted to sow you this picture because I'm so proud to have 3 vectorbeam
cabs :)
http://www.vernimark.com/temp/3vectorbeam.JPG

Regards,
Marco

-----Original Message-----
From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of John Robertson
Sent: giovedì 12 gennaio 2012 7.27
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Problems restoring a SPEED FREAK

vernimark wrote:
> Hi All,
> I finished to restore my SPEED FREAK sone days ago when the HV transformer
> decided to die. Tripler is ok.
> Do you know where to find/buy a replacements?
> OR
> Do you have a complete monitor PCB for sale?
> Attached the last picture of the (still) working cabinet :(
>
>
> and here a short movie
>
http://www.youtube.com/watch?v=-hTvIEjMFr4&feature=g-upl&context=G2181f98AUA
> AAAAAAAAA
>
> regards
> Marco
>
>
I have a couple of NOS HV transformers left for Vector/Cine monitors @
$75 each.

Are you sure it is bad? Sometimes one of the tiny wires broke and with
careful soldering one could bring it back to life.

Do a continuity check to see if that may be the problem, be very careful
testing the wires, they are very thin gauge!

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com