Re: vetor: ZVG playing up

thanks william

that's what i'm looking for.. my shead is not ideal for arcade machines :(
to hot in summer to cold(& damp) in winter..

  To: vectorlist@vectorlist.org
  Sent: Monday, February 13, 2012 6:08 AM
  Subject: Re: VECTOR: vetor: ZVG playing up

  I like a part that is sealed to keep dust out of the wiper area. The boxed parts have a more convenient adjustment slot and typically provide a better value tolerance and temperature stability. If you don't mind paying a buck more, you could try one of these...

  http://search.digikey.com/us/en/products/ST32ETA103/ST32ETA103CT-ND/738468
  http://search.digikey.com/us/en/products/3314J-1-103E/3314J-103ECT-ND/86559
  http://search.digikey.com/us/en/products/3313X-1-103E/3313X-103ECT-ND/1232575

  If you want to check the footprint measurements, download the datasheets from the above pages and compare their recommended PCB patterns to your original, or just compare the mechanical drawing measurements to your original part.

  William Boucher
  http://www.biltronix.com
    ----- Original Message -----
    From: Tim Iskander
    To: vectorlist@vectorlist.org
    Sent: Sunday, February 12, 2012 10:26 AM
    Subject: Re: VECTOR: vetor: ZVG playing up

    On 2/12/2012 10:02 AM, Rodger Boots wrote:
      On Feb 12, 2012 8:39 AM, "Tim Iskander" <timiskander@gmail.com> wrote:
>
> On 2/12/2012 1:15 AM, Rodger Boots wrote:
>>
>> A quick search shows 1173 of them at http://www.questcomp.com/QuestDetails.aspx?pn=TC03X-2-103E&pnid=208817&stock=YesOnly <http://www.questcomp.com/QuestDetails.aspx?pn=TC03X-2-103E&pnid=208817&stock=YesOnly>
>>
>> Digikey's http://search.digikey.com/us/en/products/PVZ3G103C01R00/490-4611-1-ND/1203954 is VERY close to being the same part.
>>
> Except the digikey part is surface mount :(

      They are BOTH surface mount.

    Doh... That'll teach me to pay attention (probably not, but it should :) )
    I breezed right past the whole ZVG bit and was thinking classic vectors :O
    cheers
    /Tim

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Feb 13 02:49:42 2012