On my schematic in the GO8 service manual it looks like R306 is 4R7 1/2
watt. don't know what that means.
Picture attached of schematic section
In a message dated 8/13/2012 12:33:02 A.M. Eastern Daylight Time,
zittware@hotmail.com writes:
I’m repairing a G08 for a local friend of mine; while Recapping the
monitor and reflowing the solder joints on the connectors -
I noticed the “magic smoke” appears to have escaped R306 on the HV
regulator board long ago (IE I haven’t smelled anything). The resistor appears to
once have been
Orange Orange Gold
or 3.3ohm if I calculated it correctly.
_http://www.flickr.com/photos/52968060@N00/7771330016/sizes/z/in/photostream
/_
(http://www.flickr.com/photos/52968060@N00/7771330016/sizes/z/in/photostream/)
The schematics I have are nearly unreadable in this section of the
schematic but from what I can tell the schematic seems to indicate 4.7k or maybe
4.7ohm hard to tell.
Can someone confirm what the resistor should be?
Is there a better high rez schematic floating around somewhere?
John
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Aug 13 07:52:44 2012
This archive was generated by hypermail 2.1.8 : Wed Aug 15 2012 - 09:50:04 EDT