Re: Modern replacements / xref for deflection transistors

I wish I could unsend my previous message and replace it with this one. I
was at work and a bit distracted when I type the first one. Replacing a 2A
part with a 0.5A part obviously only works under certain conditions. I
wouldn't want that advice to lead to failures in other applications so I've
updated the list so that it is not application dependent. The following
replacements should always work.

MPSU57 = PNP, 100V, 2A, 150 MHz, hfe = 140 @ 50mA, 65 @ 250 mA, 30 @ 500 mA
Replace with ZTX753
http://www.digikey.com/product-detail/en/ZTX753/ZTX753-ND/92510

MPSU60 = PNP, 300V, 0.5A, 60 MHz, hfe = 25 @ 1mA, 30 @ 10 mA, 30 @ 30 mA
Replace with MPSW92R
http://www.digikey.com/product-detail/en/MPSW92RLRAG/MPSW92RLRAGOSCT-ND/1967202?cur=USD

MPSU07 = NPN, 100V, 2A, 150 MHz, hfe = 110 @ 50mA, 65 @ 250 mA, 33 @ 500 mA
Replace with ZTX653
http://www.digikey.com/product-detail/en/ZTX653/ZTX653-ND/92504

MPSU10 = NPN, 300V, 0.5A, 45 MHz, hfe = 25 @ 1mA, 40 @ 10 mA, 40 @ 30 mA
Replace with MPSW42G
http://www.digikey.com/product-detail/en/MPSW42G/MPSW42GOS-ND/1482545?cur=USD

William Boucher
http://www.biltronix.com

----- Original Message -----
From: <wboucher6@cogeco.ca>
To: <vectorlist@vectorlist.org>
Sent: Friday, November 23, 2012 3:38 PM
Subject: re: VECTOR: Modern replacements / xref for deflection transistors

> Regarding replacing MPSU57 with MPSA56, it would be much better to use
> MPSW92R...
> http://www.digikey.com/product-detail/en/MPSW92RLRAG/MPSW92RLRAGOSCT-ND/1967202?cur=USD
>
> however, an ideal replacement (much closer equivelency) component would be
> the ZTX753...
> http://www.digikey.com/product-detail/en/ZTX753/ZTX753-ND/92510
>
> The NPN compliment to this would be the ZTX653...
> http://www.digikey.com/product-detail/en/ZTX653/ZTX653-ND/92504
>
> A good sub for MPSU07 is MPSW42G...
> http://www.digikey.com/product-detail/en/MPSW42G/MPSW42GOS-ND/1482545?cur=USD
> Also, the MPSU10 can also replace the 07.
>
>
> A good press-on heatsink for the newer parts is here:
> http://www.digikey.ca/scripts/DkSearch/dksus.dll?WT.z_header=search_go&lang=en&keywords=HS251-ND&x=19&y=21&cur=USD
>
>
> Bill Boucher
> http://www.biltronix.com
>
>
>> From: Ian Eure <ieure@mac.com>
>> Date: Fri, Nov 23, 2012 at 2:27 AM
>> Subject: VECTOR: Modern replacements / xref for deflection transistors
>> To: vectorlist@vectorlist.org
>>
>>
>> I managed to fry a G05 board pretty well. I swapped this working board
>> into
>> a dead monitor to test, turns Q608 & Q709 had been swapped and R718
>> caught
>> fire. Also as it happens, someone had replaced F700 on this deflection
>> board with a 10A fuse, so while F600 blew and the Y section is likely
>> fine,
>> a bunch of stuff in the X section got fried.
>>
>> It looks to me like R718, R713, Q705, and Q706 at least are dead.
>>
>> Q705 is just a 2N3906, which I can get anywhere, but Q706 looks harder to
>> come by. While I was digging around the internet, I found this incredibly
>> great list of V2000/G05 transistors with some cross references:
>> http://westnet.com/~chris/arcade/g05_transistor_list.pdf Unfortunately,
>> this list is a good 13 years old itself, so the parts it suggests are
>> obsolete as well.
>>
>> I went looking around and MPSU57 is long discontinued, as is SK3200 and
>> the
>> "upgrade" NTE50 part. NTE189 is the modern replacement for NTE50, but
>> seem
>> to be extremely expensive ($30) when they can be found at all. I found
>> some
>> folks saying they had successfully substituted MPSA56 for MPSU57, as well
>> as MPSA05 for the MPSU07 at Q607/Q707.
>>
>> Has anyone successfully substituted those parts? Looking at the
>> datasheets,
>> it seems like the tolerances are somewhat lower, so I was hoping someone
>> could point me in the right direction. I have a few boards I want to work
>> through, so having some of these on hand will be a big help.
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Nov 24 14:36:16 2012