Re: Wells Gardner 6100 issue in my Black Widow!

Kirk,  Try this (if you not already done so)... I ran into a very similar issue after recapping my HV Cage in an Old Tempest 10 years ago. Check the Transistors connected to the HV Cage themselves which should be Insulated Insulated with a piece of MICA or some similar item. Long story short, be sure that the Insulator(s) are Good in the HV Cage Transistors. My issue with Tempest was much like yours, when All Colors combined in the Attract Mode Screen which created the work TEMPEST in the color White, I would get an Instant Blooming Effect  Once I replaced the Suspect Insulators in my HV Cage - problem solved. _Arcadius  ________________________________ From: Kirk Spradling <kspradling_at_kc.rr.com> To: vectorlist_at_vectorlist.org Sent: Wednesday, January 9, 2013 7:59 AM Subject: Re: VECTOR: Wells Gardner 6100 issue in my Black Widow! Not a specific solution however when the screen size increases, it is typically related to decreased high voltage.  If you haven't done so already, I would replace the electrolytic capacitors on the deflection board and in the high voltage cage. The 6100 FAQ may have some usefull information as well. Kirk S. ----- Original Message ----- From: "Grant Thienemann" <grant.thienemann_at_gmail.com> To: <vectorlist_at_vectorlist.org> Sent: Tuesday, January 08, 2013 10:20 PM Subject: VECTOR: Wells Gardner 6100 issue in my Black Widow! > Hey Guys, > > Me  . . .  again . . . I got the G08 straightened out, well almost, > but anyway, I picked up a Black Widow this weekend, and I have had a > WG6100 that I was going to put in it and whenever the 6100 goes white, > the image expands, and actually whenever you use any of the colors > together, other than red, green, and blue, the image starts to expand! > > Here is a video I made of the issue: > > http://youtu.be/6z9257XCeus > > Any help would be highly appreciated! > > Thanks > Grant > --------------------------------------------------------------------------- > ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org > ** Please direct other questions, comments, or problems to chris_at_westnet.com > --------------------------------------------------------------------------- ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org ** Please direct other questions, comments, or problems to chris_at_westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jan 10 22:28:57 2013