Re: K6100 2n3792 replaced with 2n5876

Don't do it for deflection would be my recommendation I suppose (although it works). It might be ok in the LV supply section as its a power transistor after all?

Just pony up and get the right thing :)

Andrew Welburn (mobile)
www.andys-arcade.com

On 14 Jan 2013, at 19:45, david grohowski <electronicamuse@aol.com> wrote:

> What are the implications of using 3055s? It never dawned on me to use these. I have a large supply of them and very short on 3792s.
>
> thx
> . I have even seen 2n3055's installed once, a mark of operator desperation to get it running i guess :)
>
>
> david grohowski
> electronicamuse@aol.com
>
>
> -----Original Message-----
> From: Andrew Welburn <andy@andysarcade.net>
> To: vectorlist <vectorlist@vectorlist.org>
> Sent: Sun, Jan 13, 2013 2:19 am
> Subject: Re: VECTOR: K6100 2n3792 replaced with 2n5876
>
> All sorts of transistors will work, the 5876 I've seen quite a bit. I have even seen 2n3055's installed once, a mark of operator desperation to get it running i guess :)
>
> Andrew Welburn (mobile)
> www.andys-arcade.com
>
> On 13 Jan 2013, at 06:44, "David Shoemaker" <davids@oz.net> wrote:
>
>>
>> Working on a monitor that was shoehorned into my Major Havoc (had to disassemble it in place to get the dang thing out).
>>
>> Found that the 2n3792’s in the X and power sections had been replaced with 5876’s. Any thoughts?
>>
>> David

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Jan 14 15:02:44 2013