Re: sencore cr70 repair

If she does I have created a section for Sencore on the TTL ftp site
that this could be added to...

ftp://ttl.arcadetech.org/TTL/Test_Equipment/

John :-#)#

Joey Oravec wrote:
> I got ahold of Sencore today. Unfortunately (like I expected) the CR70
> is "obsolete and we cannot accept it for repair". The lady was pretty
> nice and she's looking around to see if there's any service
> information or a calibration procedure, but it's not too optimistic.
>
> I already have the schematics, parts list, and manual but there are
> various pots that surely need adjustment after changing out
> components. Hopefully she finds that procedure.
>
> -joey
>
> On Mon, Jan 14, 2013 at 3:02 PM, Louis Srianomai <louisurfer@yahoo.com
> <mailto:louisurfer@yahoo.com>> wrote:
>
> I sent mine in to sencore itself a few years back. With return
> shipping it was a couple hundred bucks.
>
> ------------------------------------------------------------------------
> *From:* Joey Oravec <joeyoravec@gmail.com
> <mailto:joeyoravec@gmail.com>>
> *To:* vectorlist@vectorlist.org <mailto:vectorlist@vectorlist.org>
> *Sent:* Monday, January 14, 2013 11:55 AM
> *Subject:* VECTOR: sencore cr70 repair
>
> Does anybody know of somewhere in the USA that can repair and
> calibrate Sencore CR70 CRT rejuvinators? Mine has something wrong
> on the green cutoff test. The needle spikes low and cannot be
> adjusted.
>
> I'd consider digging in and trying to fix it, but there are a
> bunch of adjustable pots and I didn't see a calibration or
> self-test procedure in the user manual or the repair manual.
> Without a self-test or calibration it seems like a shotgun repair
> might end up doing it more harm than good.
>
> -joey
>
>
>

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com