Re: Safe to run a LL PCB with +5V only ?

Thanks for both quick replies !

Let's see why that board is totally dead.....

Op 21 feb. 2013, om 17:28 heeft Jess Askey <jess@askey.org> het volgende geschreven:

> Most Atari's also need the 10.3VDC for the reset circuitry, but looking at the LL schems, those first generation ones don't use the 10.3VDC on the game PCB so it looks like you will be fine with just the +5VDC. It won't hurt anything on the PCB to not have the 36VAC, but the video outputs (and probably sound) will not work, which won't matter for you just using the Fluke.
>
> -----Original Message-----
> From: owner-vectorlist@vectorlist.org [mailto:owner-vectorlist@vectorlist.org] On Behalf Of Andre Huijts
> Sent: Thursday, February 21, 2013 9:31 AM
> To: vectorlist@vectorlist.org
> Subject: VECTOR: Safe to run a LL PCB with +5V only ?
>
> For testing a Lunar Lander PCB (which has been converted to Asteroids) is it OK to just hook up the +5V only so I can do some basic testing with the Fluke 9100A ?
>
> Sorry if this is a beginner's question...then again, I am a beginner :)
>
>
> André Huijts
> andre.huijts@upcmail.nl
>
>
>
>
>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com

André Huijts
andre.huijts@upcmail.nl

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Feb 21 11:57:23 2013