Re: Testing vectorbeam monitors.

Any chance I could take a crack at them, too?
On Feb 27, 2013 3:26 PM, "John Robertson" <pinball@telus.net> wrote:

> **
> On the way...
>
> These are about 3.5mb each though...need to be cleaned up a bit. I have
> them in TIFF format if someone wants to do some editing of dust/smudges,
> etc. to shrink them. They are 11 X 17 inch format.
>
> John :-#)#
>
> Carlos Rubio wrote:
>
> John, would you mind sending me those early Vectorbeam monitor
> schematics? I've been looking for those! Thanks,
>
> Carlos
>
>
> On Wed, Feb 27, 2013 at 3:52 PM, John Robertson <pinball@telus.net> wrote:
>
>> Hi Pat,
>>
>> If you want to send me the raw doc file I'll see about getting it up on
>> the wiki and keep an eye on it until someone with more time./interest wants
>> to watch over it.
>>
>> I have some schematics I want to add for example - early Vectorbeam
>> monitor ones that have the alternate part numbers sometimes found...
>>
>> John :-#)#
>>
>> Pat Danis wrote:
>>
>>> Just heard back from Tom. His e-mail has been edited for only the
>>> pertinent info. Basically he says yes. He has included the original Doc.
>>> file. I am the last person to be put in charge of this project although I
>>> am more than willing to contribute. If there is a knowledgeable volunteer
>>> that wants to take on this project, please let me know and I will forward
>>> the doc to you.
>>>
>>> Pat
>>>
>>> Quote:
>>>
>>>
>>> "Hey Pat, Please update and modify it. I wanted input from other (more
>>> knowledgeable) people than myself. File attached. I don't need/want any
>>> credit, so don't worry about that.
>>>
>>> tm"
>>>
>>> end quote
>>>
>>>
>>>
>>> On 2/24/2013 10:18 PM, John Robertson wrote:
>>>
>>>> Pat Danis wrote:
>>>>
>>>>> John:
>>>>>
>>>>> Tom sold off most of his arcades and projects. I bought a lot of it.
>>>>> There are others that managed to get a few gems. I can give him a call
>>>>> and ask about modifying the FAQ. I don't think he will mind as long as
>>>>> proper attribution is given.
>>>>>
>>>>> Pat
>>>>>
>>>> Yes, if Tom has the .doc original that would be better, perhaps it
>>>> could be treated like LibreOffice etc. and perhaps a small committee can
>>>> oversee updates.
>>>>
>>>> John :-#)#
>>>> ---------------------------------------------------------------------------
>>>>
>>>> ** Unsubscribe, subscribe, or view the archives at
>>>> http://www.vectorlist.org
>>>> ** Please direct other questions, comments, or problems to
>>>> chris@westnet.com
>>>>
>>>>
>>> ---------------------------------------------------------------------------
>>>
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>>
>>>
>>
>> --
>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
>> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
>> www.flippers.com "Old pinballers never die, they just
>> flip out"
>>
>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>>
>
>
>
> --
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
> www.flippers.com
> "Old pinballers never die, they just flip out"
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Feb 28 01:45:04 2013