RE: Major Havoc test mode

From: Jess Askey <jess_at_askey.org>
Date: Tue Jul 30 2013 - 16:21:52 EDT

Does the Self test show anything now that you have video up? Your gamma
might just be having issues...

 

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Kevin Moore
Sent: Tuesday, July 30, 2013 2:10 PM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Major Havoc test mode

 

Ok video is up. If you can tell me what ram it is that would be great.
But I don't think that will be the case. It beeps rapidly for about 5
secs then stops, as you can hear in the video.

Kevin

 

On Tue, Jul 30, 2013 at 3:06 PM, Kevin Moore <talon.k@gmail.com> wrote:

Here's a quick video of the beeping.

http://youtu.be/g1XWChBp-Y8

It's still processing so the video may not be avail for a few more
minutes.

Kevin

 

On Tue, Jul 30, 2013 at 3:02 PM, Jonathan Koolpe <jkoolpe@hotmail.com>
wrote:

I think Jess is correct. I had a MH board that also beeped at me with
no video. From what I recollect, the number of beeps pointed me to a
specific RAM chip (after consulting the manual) that I replaced and
voila! Board worked just fine after that...

One of the easiest board repairs I ever had....took about 5 minutes ;)
...

Jon

________________________________

Subject: RE: VECTOR: Major Havoc test mode
Date: Tue, 30 Jul 2013 13:41:14 -0600
From: jess@askey.org
To: vectorlist@vectorlist.org

 

The beeps mean that there is a RAM error of some sort I believe.

 

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Kevin Moore
Sent: Tuesday, July 30, 2013 1:55 PM
To: vectorlist@vectorlist.org
Subject: VECTOR: Major Havoc test mode

 

Ok I'm not having any luck with this thing at all.

No video in test mode

In fact when you put it in test mode you get a rapid succession of beeps
for about 4-5 seconds, then it stops beeping.

It's not watchdogging

I've been able to fluke the program roms, and rams, and even the paged
roms with good sigs

Not sure how or if I can check sigs on 106 107 and 110

on the gamma side I can check 108 just fine.

If the gamma processor isn't communicating, I would think I would still
have video showing me that the gamma isn't communicating..

Lost.

Kevin

 

 

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jul 30 16:37:05 2013

This archive was generated by hypermail 2.1.8 : Tue Jul 30 2013 - 17:50:00 EDT