Re: 2N3716 vs. 2N3716X

On 09/29/2013 5:40 AM, Jeffrey Matthews wrote:
> Hi;
> I searched the usual forums (and Google) but did not find much
> information regarding a 2N3716 vs. 2N3716X transistor as used in the
> WG6400 application. I found a spec sheet (after some searching) for a
> 2N3716X and the only difference that I can find, (it is an abridged
> spec sheet - not complete) is that the 2N3716 has a hfe 0f 4.0 to
> ----, (no end number given) and the "X" has a hfe of 50 to 200.
> Is it safe to assume the "standard" transistor will work in place of
> the "X" version?
> Does anyone have full spec sheets for the 2N3716X and the 2N3792X
> transistors?
> Thanks in advance.
> Jeff

"X" was the extended range (special selection). I see no need for it if
you have the LV1000 kit installed...

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                  www.flippers.com
"Old pinballers never die, they just flip out"
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com