Re: 2N3716 vs. 2N3716X

LV2000 - only off by 1000, hardly a big difference! (ducking)

http://www.vector-repair.com/

Interesting, there is now an LV2000 -Light.

John ;-#)#

On 09/30/2013 12:17 PM, David Shoemaker wrote:
> Is there a lv1000 for the 6400?
>
>
> David :-)=
> ------------------------------------------------------------------------
> From: John Robertson <mailto:pinball@telus.net>
> Sent: ‎9/‎30/‎2013 10:45 AM
> To: vectorlist@vectorlist.org <mailto:vectorlist@vectorlist.org>
> Subject: Re: VECTOR: 2N3716 vs. 2N3716X
>
> On 09/29/2013 5:40 AM, Jeffrey Matthews wrote:
> > Hi;
> > I searched the usual forums (and Google) but did not find much
> > information regarding a 2N3716 vs. 2N3716X transistor as used in the
> > WG6400 application. I found a spec sheet (after some searching) for a
> > 2N3716X and the only difference that I can find, (it is an abridged
> > spec sheet - not complete) is that the 2N3716 has a hfe 0f 4.0 to
> > ----, (no end number given) and the "X" has a hfe of 50 to 200.
> > Is it safe to assume the "standard" transistor will work in place of
> > the "X" version?
> > Does anyone have full spec sheets for the 2N3716X and the 2N3792X
> > transistors?
> > Thanks in advance.
> > Jeff
>
> "X" was the extended range (special selection). I see no need for it if
> you have the LV1000 kit installed...
>
> John :-#)#
>
> --
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
> www.flippers.com
> "Old pinballers never die, they just flip out"
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                  www.flippers.com
"Old pinballers never die, they just flip out"
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com