Re: GO7 Problem

Check the power before it gets to the chassis. Sounds like a problem
with the power supply on the monitor chassis.

On Fri, 24 Oct 2003 11:31:37 -0700, Justin Monast wrote:

>
>
>I have a GO7 in a MS Pacman that seams to be taking 170V from the isolation
>transformer. I replaced and check the iso and I'm positive that the
>voltages going into the iso is at 120V on the hot and 0V on the neutral.
>The funning thing is that when I check for voltages on the power inputs for
>the GO7 hot and neutral both show 170V. I believe something is wrong here
>and I don't have a spare monitor at the moment to test with, I was wondering
>if anybody have had this issue before?
>
>P.S. Everything seems to be grounded correctly...
>
>Thanx
>Justin
>http:\\www.arcadecoinops.com
>mailto:jmonast@naughtydog.com
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
>** message body to rasterlist-request@vectorlist.org. Please direct other
>** questions, comments, or problems to chris@westnet.com.
>

Steven Gregory
ArcadeShop Amusements
sgregory@arcadeshop.com
http://www.arcadeshop.com

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com.
Received on Fri Oct 24 15:11:02 2003