Re: Sanyo 14" Capacitor Values/Locations?

It doesn't appear you have a Sanyo monitor (maybe a Sanyo CRT, but your
numbers just don't match up to a monitor).

Brad Gass wrote:

>All,
>
>I'm trying to re-cap a Sanyo 14" monitor for my father-in-law (who lives 4
>hours away), and have some differences between what's actually installed
>in the chassis now and what the manual says should be there.
>
>Ordinarily, I would just replace with like values and voltages, but this
>chassis looks like such a hack-job as it is, and with some of the values
>and voltages being substantially different than the manual lists, I need
>to verify it before I recap and return on the next trip. It could be
>differences in versions of the chassis as well, but better to ask than
>perpetuate a nasty hack-job like this.
>
>Below is a table of listing the differences between what's in the chassis
>and what's in the manual. Obviously, caps that are installed with a
>higher WVDC isn't an issue (although I'd still like to know what they are
>supposed to be if possible so working voltage doesn't continue to creep up
>every time it's re-capped), but the bothersome ones are where capacitance
>doesn't match, or voltage is lower than specified.
>
>(I hope this comes across OK)
>
>Location uF (man) WVDC (man) uF (act) WVDC (act)
>162 4.7 25 6.8 35
>166 1 50 1 160
>206 4.7 25 6.8 35
>211 100 16 none
>406 4.7 160 10 160
>408 4.7 25 4.7 50
>458 1 50 none
>484 330 25 220 25
>610 100 25 1 160
>254 none 47 25
>255 none 47 25
>256 none 47 25
>460 none 1 50
>474 none 330 25
>475 none 1 160
>
>This is working off of the Atari manual I had in-house, as well as the
>schematics I dug up online (thanks, Mike!).
>
>Any help, pointers, or information would be GREATLY appreciated!
>
>
>Brad
>---------------------------------------------------------------------------
>** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>** Please direct other questions, comments, or problems to chris@westnet.com
>
>
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed May 5 14:56:23 2004