RE: Reactor sound board dip settings

Here's what I have going on.. The sound board does not generate sound other than at power on.
 
The main board(s) work fine, as does the sound board in Q*Bert (with reactor roms tested.)
 
The PS is putting out ~5v. On board this makes ~4.3v.
 
Is it possible that there is not enough voltage to send out the proper signals to the sound board? The 74ls377 is fine.
 
Thanks,
JB

________________________________

From: owner-rasterlist@vectorlist.org on behalf of Joe
Sent: Tue 7/6/2004 1:21 AM
To: rasterlist@vectorlist.org
Subject: RASTER: Reactor sound board dip settings

Anyone know what the dip switches on reactor are supposed to be set to?

I have a working main board here and a working sound board. But, I can't
seem to get the working main board to cooperate with the working sound
board.. So, just a hunch that it may be dip switches. All the sound
tests pass when connected to a working Q*Bert main board.

Thanks,
JB

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jul 13 17:53:27 2004