Re: Re: Death Race Sound

The TIP29C is probably in a TO-220 case, 3 leads out of one end with a
metal tab out of the other. If that is what the old one looks like
then, fine.

But if the old one is in a TO-3 case, metal with two holes and 2 pins,
something like a 2N3055 or, since this IS the vectorlist, a 2N3716
should do.

Matthew Rossiter wrote:
> The transistor is a motorola part with the number 626 on it. If I go to
> mouser.com it comes up with one part number under transistors -> TIP29C.
> It's an NPN transistor. Does anyone happen to know if this sounds correct?
> It probably wouldn't hurt to change the 6.8uf tantalum capacitors either.
>
> http://games.rossiters.com/manuals/Death-Race.tif
>
> Matt
>
>
>
>
> ----- Original Message ----- From: "peter jones" <highwayman2000@mail.ru>
> To: <rasterlist@vectorlist.org>
> Sent: Saturday, August 19, 2006 2:28 PM
> Subject: RASTER: Re: RASTER: Death Race Sound
>
>
>> probably Q4 the transistor with the bogus order-code instead of a
>> part-number.
>>
>> that or CR10 zener diode.
>>
>> ---------------------------------------------------------------------------
>>
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Aug 19 22:42:18 2006