Re: Spy Hunter help?

From: Rich Gopstein <rich_at_ourowndomain.com>
Date: Wed Sep 08 2010 - 09:20:58 EDT

You were correct about the board set being from a sit-down - it
matches the connections on the sit-down schematic exactly.

Some good news... I was able to get the ebay boardset partially
running.  The SSIO board had some damaged components and cut traces -
which I fixed.  I also resoldered all of the board-interconnect
headers.  That got the video to work properly - including the
upside-down image.  The game is now playable..

I still don't have sound and I get the Sound Board Interface Error,
though.  I gather from other posts that this is pretty common.

I guess the next step is to debug the Z80 section of the sound board...

Rich

On Sat, Sep 4, 2010 at 2:43 PM, Teaganm <teaganm@yahoo.com> wrote:
>
> Hey Rich,
> The SSIO A082-90913-G000 is correct for a upright Spy Hunter.  The extra connector is not used.  The G000 has support for more I/O than some of the other versions.  I snapped a pic of mine here to show the connections to the edge.
> http://teaganm.cademo.com/images/other/SSIOEdge.jpg
>
> As you said the A080-91657-A000 has panning, so that most likely was used in the sitdown version.  Both SSIO boards should be interchangeable, just your cabinet doesn't have the ability to use the extra sounds of the panning board.
>
> I don't know of any dip switch to invert the video and as far as I know Spy Hunter has never used with a mirror.  Perhaps the video or CPU came from a game that used a mirror like Kickman or Kozmik Krooz'r.
>
> As far as troubleshooting I'm not going to be much help.  Other than the power supplies, I've had good luck keeping my MCRs running.  There is a MCR FAQ that was made several yours back that makes for good reading.
> http://users.rcn.com/jenison/mars/faq/MCR_FAQ.txt
>
> Good luck & keep us posted.
>
> Steve
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Sep 8 09:21:03 2010

This archive was generated by hypermail 2.1.8 : Wed Sep 08 2010 - 19:50:00 EDT