<x-html>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
You may want to change your crystal frequency to some handy multiple of 1200
baud. There's a good reason all those old com port boards used a 1.8432
MHz crystal---it divided nicely to common baud rates.<br>
<br>
<br>
David Shoemaker wrote:<br>
<blockquote type="cite" cite="mid000a01c329a8$dc903a30$7f00a8c0@obie">
<meta http-equiv="Content-Type" content="text/html; ">
<meta content="MSHTML 6.00.2800.1170" name="GENERATOR">
<style></style>
<div><font face="Arial" size="2">Well today was an educational and busy
day with the atmel website.</font></div>
<div> </div>
<div><font face="Arial" size="2">It was also close but not quite a living
hell with WinDraft.</font></div>
<div> </div>
<div><font face="Arial" size="2">I have posted a bmp with my current schematic
plans based on the AT90S2323 part. The only draw back to this part is that
it does not have a built in UART. So one will have to be written in software,
anyone with a good AVR background want to tackle that? I am sure I can
do it, but it might take me a while.</font></div>
<div> </div>
<div><font face="Arial" size="2">If I can't come up with a software UART
solution I can change over to the 2313 part which has a built in UART.
Of course the part is also 20 pin instead of the tiny 8 pin 2323 with lots
of left over pins wasted.</font></div>
<div> </div>
<div> </div>
<div><font face="Arial" size="2">I will be basing the software off of one
of the atmel application notes: AVR313. That note is for the 8515 part (a
40 pin part) but I think I can adapt it well enough (once again assuming
a software UART can be written).</font></div>
<div> </div>
<div><font face="Arial" size="2">Looking for feedback.</font></div>
<div> </div>
<div><font face="Arial" size="2">The bmp (and my schematic file and a start
of an atmel part library) are at: <a
href="http://www.thewellworld.net/fluke/wedge">http://www.thewellworld.net/fluke/wedge</a></font></div>
<div> </div>
<div><font face="Arial" size="2">If anyone has more experienced with WinDraft
and wants to clean up the schematic I wouldn't mind a bit :) Or if you
know how to edit a part in a library after you have closed the dang library
file.</font></div>
<div> </div>
<div><font face="Arial" size="2">David</font></div>
</blockquote>
<br>
</body>
</html>
</x-html>
Received on Tue Jun 03 14:50:10 2003
This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:52 EST