Re: RE: Fluke 9010a question

I agree with James B, what game are you working on?

But I don't agree with James B on the watchdog disable, you can configure
the Fluke to ignore the watchdog. Depends on what you are doing. I do
agree with his suggestion that this could be your problem (faulty watchdog).

Your thinking about running the board & seeing where it crashes is better
suited for a Logic Analyzer than a Fluke, since the LA may be configured to
tell you the line before your crash.

Kev

>On Sat, 24 Jan 2004 11:14:09 -0500 "James Bright" <james@quarterarcade.com>
wrote.
>Not knowing the specifics of the board that you are working on, usually
>I focus on the watchdog circuitry. Usually that will tell you what is
>happening or not happening. (Note that you have to disable the watchdog
>when using a fluke, so even if you could execute code line-by-line you
>wouldn't easily be able to tell what is wrong.)
>
>If you give more specifics, other people familiar with the board that
>you're working might be able to help.
>
>--James Bright
>www.QuarterArcade.com
>Restored Arcade Games for your Home
>
>> -----Original Message-----
>> From: Joe [mailto:joe@joesarcade.com]
>> Sent: Saturday, January 24, 2004 11:06 AM
>> To: James Bright; techtoolslist@flippers.com
>> Subject: RE: Fluke 9010a question
>>
>> I have a board that resets immediately upon power up. So, since all of
>> the normal stuff has been checked and rechecked, I was hoping I could
>> execute the code line by line and see when the board resets..
>>
>> -----Original Message-----
>> From: James Bright [mailto:james@quarterarcade.com]
>> Sent: Saturday, January 24, 2004 9:45 AM
>> To: Joe; techtoolslist@flippers.com
>> Subject: RE: Fluke 9010a question
>>
>>
>> No, not really. What are you trying to do?
>>
>> --James Bright
>> www.QuarterArcade.com
>> Restored Arcade Games for your Home
>>
>> > -----Original Message-----
>> > From: owner-techtoolslist@flippers.com [mailto:owner-
>> > techtoolslist@flippers.com] On Behalf Of Joe
>> > Sent: Saturday, January 24, 2004 9:31 AM
>> > To: techtoolslist@flippers.com
>> > Subject: Fluke 9010a question
>> >
>> > The manual can't seem to provide the answer for me or at least I
>cant
>> > find it in there.. So,
>> >
>> > Is there a way with the Fluke to execute code one command at a time?
>> IE:
>> > Run UUT at 3000 and hit a button on the fluke after each op.
>> >
>> > Thanks,
>> > JB
>> > If you ever want to (un)subscribe yourself with TTL, you can send
>mail
>> to:
>> > <Majordomo@flippers.com>
>> > with the following command in the body of your email message:
>> > (un)subscribe techtoolslist
>> > or from another email account, besides xxx@yyy.com:
>> > (un)subscribe techtoolslist xxx@yyy.com
>>
>
>
>
>If you ever want to (un)subscribe yourself with TTL, you can send mail to:
><Majordomo@flippers.com>
>with the following command in the body of your email message:
>(un)subscribe techtoolslist
>or from another email account, besides xxx@yyy.com:
>(un)subscribe techtoolslist xxx@yyy.com

If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com
Received on Sat Jan 24 15:51:45 2004