RE: Pac-Man / Amiga 1084s question

Matt,

I found that the amiga monitors sometimes needed their sync 'window'
moving around a bit to sync up on a lot of boards..

This requires removing the case and finding the H.FREQ pot.. this is
often near the front of the tube on the right (if you looked from the
back).

I've had numerous monitors over the years, and I have had to do this for
2-3 of them, as only certain games would sync up..

Andy Welburn
www.andys-arcade.com

-----Original Message-----
From: owner-techtoolslist@flippers.com
[mailto:owner-techtoolslist@flippers.com] On Behalf Of Matt Rossiter
Sent: 26 February 2004 02:17
To: techtoolslist@flippers.com
Subject: Pac-Man / Amiga 1084s question

I'm trying to display pacman on an Amiga 1084s monitor. For some reason
I
can't get it to sync up.

I've got the colors right. I connected the composite sync to R36 but it
keeps rolling. Anyone got some suggestions? This monitor works great
for
most other games I've tested. It doesn't roll when connected in the
cabinet.

Matt

If you ever want to (un)subscribe yourself with TTL, you can send mail
to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com

If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com
Received on Thu Feb 26 06:01:21 2004