Re: Fluke 9100 on Tron hardware

Is the UUT using a Z80A(or B)? The regular Z80 pod doesn't like the
faster Z80's, you need to upgrade the CPU in the pod to a Z80B...I
think that might work.

John :-#)#

At 1:20 PM -0700 5/1/04, Chris Loggans wrote:
>Has anyone successfully used the Fluke system on MCR
>(Tron) hardware? When I try to get a signature from
>the ROM's, it comes back different every time. When I
>try to do a RUN UUT, the game self test runs and
>reports errors with all of the ROMs and occasionally
>the RAM. This is all happening on a known working
>board with the watchdog disabled. If I pull the test
>pod out and put the CPU back in, everything works
>fine. Oh, and I've also tried two different Z80 pods,
>with the same results. Any thoughts?
>
>Thanks,
>-Chris

If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com
Received on Sat May 1 20:13:58 2004