RE: Fluke 9100 on Tron hardware

I thought you had to have a z80AA pod (which I do) or better... but I
get the same results you report. What z80 type of pod are you running?

JB

--James Bright
www.QuarterArcade.com
Restored Arcade Games for your Home

> -----Original Message-----
> From: owner-techtoolslist@flippers.com [mailto:owner-
> techtoolslist@flippers.com] On Behalf Of Chris Loggans
> Sent: Saturday, May 01, 2004 4:20 PM
> To: techtoolslist@flippers.com
> Subject: Fluke 9100 on Tron hardware
>
> Has anyone successfully used the Fluke system on MCR
> (Tron) hardware? When I try to get a signature from
> the ROM's, it comes back different every time. When I
> try to do a RUN UUT, the game self test runs and
> reports errors with all of the ROMs and occasionally
> the RAM. This is all happening on a known working
> board with the watchdog disabled. If I pull the test
> pod out and put the CPU back in, everything works
> fine. Oh, and I've also tried two different Z80 pods,
> with the same results. Any thoughts?
>
> Thanks,
> -Chris
>
> If you ever want to (un)subscribe yourself with TTL, you can send mail
to:
> <Majordomo@flippers.com>
> with the following command in the body of your email message:
> (un)subscribe techtoolslist
> or from another email account, besides xxx@yyy.com:
> (un)subscribe techtoolslist xxx@yyy.com

If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com
Received on Sat May 1 20:18:28 2004