Re: fluke 9010a and sega outrun

I would start by locating a memory map for that board. What addresses
address the RAN, ROM etc. Then you can use the fluke to capture ROM
crc values and the you can start writing a simple script that will do
RAM and ROM checks for you.

On 4/22/05, tony <tony@htbsusa.com> wrote:
>
>
> i am not that good with the fluke scripts
>
> can someone help setting up a fluke
>
> with a fluke 9010a and 1 known good board (sega out run)
>
> what is the best way to record the good board in the fluke 9010a
>
> i have the rs232 on the back and fide and risk
>
> through the 68000 and use it as a script to run it on a bad board (Sega out
> run)
>
> or does anyone already have a script done for this
>
> any help would be great
>
> thanks tony
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
>
>

-- 
-Adam
====================
 http://www.onecircuit.com
====================
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist