I take it those of us with an HP 10529A Logic Comparator aren't so lucky
with the PROM capability?
tm
John Robertson wrote:
> The CMOS tester is very easy to use. Simply GLOMP the correct IC test
> clip on the IC in question, flip the toggle switches in if any pins are
> tied to Vcc or Gnd (power usually, but other tied pins would be good).
>
> Kev has a write up: http://users.erols.com/mowerman/bugtrap.htm
>
> I have the manuals if no=one can find them on-line then I'll try to get
> around to scanning them.
>
> John :-#)#
>
> At 12:57 PM -0500 2/24/06, Electronicamuse@aol.com wrote:
>
>> In a message dated 2/24/2006 12:13:47 P.M. Eastern Standard Time,
>> jrr@flippers.com writes:
>>
>> Disclaimer: I don't work for BUGTRAP...
>>
>> Good thing, since I think that they disbanded 2 decades ago. :)
>>
>> Could you share your Bugtrap setting/instructions? I have a Bugtrap
>> CMOS and regular version. I never took the time to learn to use it.
>> Damn to-do list is pretty long. :)
>>
>>
>> Dave
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Fri Feb 24 14:56:23 2006
This archive was generated by hypermail 2.1.8 : Fri Feb 24 2006 - 16:50:01 EST