Re: Kool Tools: IC Comparator checks PROMs

Don't you have to make a separate board for each IC? I also have one
of those buried in a drawer - mine has a "Universal" board that you
can install any IC into and jumper - but way to time consuming...if
I'm right that is.

John :-#)#

At 1:54 PM -0600 2/24/06, Tom McClintock wrote:
>I take it those of us with an HP 10529A Logic Comparator aren't so
>lucky with the PROM capability?
>
>
>
>
>tm
>
>John Robertson wrote:
>>The CMOS tester is very easy to use. Simply GLOMP the correct IC
>>test clip on the IC in question, flip the toggle switches in if any
>>pins are tied to Vcc or Gnd (power usually, but other tied pins
>>would be good).
>>
>>Kev has a write up: http://users.erols.com/mowerman/bugtrap.htm
>>
>>I have the manuals if no=one can find them on-line then I'll try to
>>get around to scanning them.
>>
>>John :-#)#
>>
>>At 12:57 PM -0500 2/24/06, Electronicamuse@aol.com wrote:
>>
>>>In a message dated 2/24/2006 12:13:47 P.M. Eastern Standard Time,
>>>jrr@flippers.com writes:
>>>
>>>Disclaimer: I don't work for BUGTRAP...
>>>
>>>Good thing, since I think that they disbanded 2 decades ago. :)
>>>
>>>Could you share your Bugtrap setting/instructions? I have a
>>>Bugtrap CMOS and regular version. I never took the time to learn
>>>to use it. Damn to-do list is pretty long. :)
>>>
>>>Dave

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Fri Feb 24 16:06:59 2006