Re: Kool Tools: IC Comparator checks PROMs

You are correct sir! Ahhahahha. Yes!

John Robertson wrote:
> Don't you have to make a separate board for each IC? I also have one of
> those buried in a drawer - mine has a "Universal" board that you can
> install any IC into and jumper - but way to time consuming...if I'm
> right that is.
>
> John :-#)#
>
> At 1:54 PM -0600 2/24/06, Tom McClintock wrote:
>
>> I take it those of us with an HP 10529A Logic Comparator aren't so
>> lucky with the PROM capability?
>>
>>
>>
>>
>> tm
>>
>> John Robertson wrote:
>>
>>> The CMOS tester is very easy to use. Simply GLOMP the correct IC test
>>> clip on the IC in question, flip the toggle switches in if any pins
>>> are tied to Vcc or Gnd (power usually, but other tied pins would be
>>> good).
>>>
>>> Kev has a write up: http://users.erols.com/mowerman/bugtrap.htm
>>>
>>> I have the manuals if no=one can find them on-line then I'll try to
>>> get around to scanning them.
>>>
>>> John :-#)#
>>>
>>> At 12:57 PM -0500 2/24/06, Electronicamuse@aol.com wrote:
>>>
>>>> In a message dated 2/24/2006 12:13:47 P.M. Eastern Standard Time,
>>>> jrr@flippers.com writes:
>>>>
>>>> Disclaimer: I don't work for BUGTRAP...
>>>>
>>>> Good thing, since I think that they disbanded 2 decades ago. :)
>>>>
>>>> Could you share your Bugtrap setting/instructions? I have a Bugtrap
>>>> CMOS and regular version. I never took the time to learn to use it.
>>>> Damn to-do list is pretty long. :)
>>>>
>>>> Dave
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
>
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Fri Feb 24 16:34:33 2006